Bathroom Surfaces: Ceramic Tile Pros and Cons

Article By: John Whipple

Often praised for its durability and variety, ceramic tile is a popular choice for bathroom finishes. If you're drawn to color and texture, this material can deliver on both fronts. But the sheer variety of ceramic tiles is endless, which can make finding just the right tile very difficult. 

Because ceramic tends to cost less than porcelain and is much lighter, it's often used for wall and ceiling installations. However, there are some major cons to this material, too: It's not as strong as porcelain, so it doesn't make the best walking surface. It can be very cold underfoot in the winter, and heavy tile can be difficult to install. 

Curious if ceramic tile will work in your bathroom? Here's what you should know before making the purchase. 

Eclectic Bathroom by Seattle Architects & Designers live-work-play 

The basics: Ceramic tiles are wide ranging; all are generally made from red or white clay that's been fired in a kiln and glazed or finished. If you're a tile nerd like me, ceramic tile technically includes porcelain tile too, but for this ideabook we'll exclude that category. 

Cost: Ceramic tile is often priced below $2 per square foot. Higher-end tiles can easily run $20 to $40 and more per square foot. The average tends to be around $7 to $9 per square foot. 

Traditional Bathroom by Lindenhurst Kitchen & Bath Designers Brandstrom Interiors 

Pros: Ceramic tile can be incredibly affordable, and there's a ton of variety in styles, colors, finishes and textures. It's also easy to customize it for details like chair rails, soap dishes and special edging and nosing, as in this bathroom.

Traditional Bathroom Tile by San Diego Tile, Stone & Countertops B•D•G Design Group

Cons: Ceramic tile is not as strong as its cousin, porcelain tile, but what it lacks in strength, it makes up for in price.

Traditional Bathroom Tile by Portland Tile, Stone & Countertops ANN SACKS 

Special considerations: Since ceramic tiles often have texture, you may want to consider this to add dimension to your bathroom. The eased edge on this tile adds a little extra something to a bathroom wall, but can make it difficult to figure out how to cut end tile. Consider using a tile edge profile, like a Schluter strip, to make the transition less awkward. 

Modern Bathroom Tile by Ramsey Kitchen & Bath Fixtures Porcelanosa USA 

However, today's ceramic tile offers much more than an eased edge. This wavy tile from Porcelanosa is just one example of the texture and detail available today. 

This type of tile can make for a great accent in a bathroom, but I'd avoid using too much texture in a shower , since it can make for difficult cleaning. Try using it for a feature wall or feature corner instead. 

Eclectic Kitchen Tile by Portland Tile, Stone & Countertops ANN SACKS 

Maintenance: Make sure you choose a ceramic tile with a durable finish. How can you tell? Buy a sample, take it home and clean it to death. 

I recommend cleaning ceramic tile with a white nylon scrub brush and a little soap. You shouldn't need much more than that. Ceramic is very durable, but it's best to stick to mild household detergents and to spot test before using anything new. 

Installation: Installing ceramic tile is pretty straightforward; it could even be a DIY project if you have some experience working with tile. Many of today's ceramic tile actually has directional arrows on the back side; make sure you keep them lined up the same way so you get the correct look. 

ConsumerReports.org Buying Guide: Flooring

Photo: American Cabinet & Flooring Designer Clay Bernard

Getting Started

Begin by considering where the flooring will go and how much traffic, sunlight, and other wear and tear it will get. Vinyl proved tops in our moisture tests and most linoleum. Plastic laminates, and solid wood fared nearly as well. But many engineered woods, as well as some solid woods, and a linoleum product we tested flubbed that test - a serious drawback in a busy kitchen. And while the best vinyls and plastic-laminates fended off wear better than solid wood, they can't be refinished when worn. 

How to Shop

Before settling on a product, spend a few dollars on two or three samples. That can be a lot less expensive than winding up with flooring that looks great in a catalog or on a website and then awful in your home. Manufacturers generally match most wood or engineered-wood flooring for color or grain. But variations can occur from one batch to the next, so buy the flooring you'll need all at once. All the plastic-laminate floorboards in a package often have a similar pattern, so you may want to pull from multiple packages to avoid repetition.

To determine how much flooring you'll need, measure the room's square footage by multiplying its length times its width. (Divide an irregularly shaped room into smaller rectangles, calculate the square footage of each rectangle, and then add them together.) Then buy 7 to 10 percent extra to allow for mistakes, bad samples, and waste. You might also want to invest in an extra box of flooring for future repairs or additions. 

Where to Save

One way to save is on overstocks. Also, take advantage of mistakes. You can often save on opened or damaged boxes or on flooring with minor flaws that no one will notice.

Hiring a pro to do the installation? You can trim hundreds of dollars off the job by doing the time-consuming prep work like prying up the old flooring, leveling or filling the subfloor, and removing any baseboard that's in the way. 

Green Floors That Didn't Cut It

Bamboo is considered renewable because it's a fast-growing grass. The best bamboo floorings we tested area stranded products such as the EcoTimber solid and Teragren engineered flooring, which are made of fibers that are shredded and compressed for strength. Cork floors are made of tree bark in a process that doesn't kill trees.

Know How Rough You'll Be

The best products in every category were also the best overall in our simulated foot-traffic tests. For less busy kitchens, you may want to consider the top engineered wood or bamboo, with its blend of natural veneer and easy installation.

Pick a Factory Finish

Prefinished wood and bamboo floors cost about 40 percent more than unfinished products. But you're likely to save overall because a factory finish tends to last longer-and paying a pro to apply the finish adds costs, mess, and hassle. Factory finishes are also warranted by the manufacturer. 

Check for Certification

Vinyl floors with the industry's FloorScore certification emit relatively low levels of volatile organic compounds, substances linked to health problems and pollution. All vinyl we recommend has that certification. For wood flooring, certification by the Forest Stewardship Council and the Sustainable Forestry Initiative offers some assurance that it comes from responsibly managed forests, a plus for the planet. The product and manufacturer must be certified; check the packaging. 

When You Get it Home

Before installing wood or laminate flooring, unpack it and let it sit for one to three days in the space where it will be installed so that its temperature and moisture match the levels in the room.

Keeping New Floors Looking Good

If you need to heat the room soon after installation, raise the temperature gradually over the course of a week - especially if you have radiant heat - to allow the flooring to adjust. Sweep or vacuum floors with a soft broom or brush, and clean with a damp but not overly wet mop. Check the manufacturer's guidelines for recommended cleaning products. And put felt pads under furniture to prevent scratching. 

Types of Flooring

Though you'll find a growing array of styles, most flooring falls into one of these six types. The type of flooring you choose will depend on your taste, needs, and budget.

   Solid Wood

Photo: Mohawk Solid Wood in Oak ButterscotchAdvantages include its natural warmth and the ability to be sanded and refinished several times, along with impressive wear resistance for some. But except for the best solid bamboo, all the solid-wood products we tested dented easily, and some wore quickly and became discolored from sunlight. Pre-finished floors should hold up better than those finished on site, and their warranty comes from the factory, not the installer. But you may not like the beveled edges on many pre-finished products. While unfinished flooring costs about 40 percent less, higher installation costs can offset those savings, since the floor must be sanded and finished over several days to seal it from moisture. Wood flooring shouldn't go in basements and other damp spaces. 

Engineered Wood

Photo: Mohawk Engineered Wood in Oak Natural

This flooring uses a thin veneer of real wood or bamboo over structural plywood. Most engineered wood doesn't wear as well as solid wood or plastic laminate. It also dents easily, and small spills can damage it. Most can be carefully refinished once, but the veneer on some may be too thin. 

Plastic Laminate

Photo: Mannington Laminate in Black Forest Oak

Generally made of dense fiberboard with a photo beneath a clear plastic protective layer, laminate can mimic nearly anything from oak to marble. Some brands use real cork beneath the clear layer. But the repetitive pattern on some products compromises realism. The best laminates resist scratching, denting, and discoloration from sunlight better than most wood products, but as with engineered wood, a big spill can cause damage. You may be able to touch up minor flaws, but you'll have to replace the flooring when its outer layer wears through. 

Vinyl

Photo: Shaw Resilient Vinyl Tile in Grey Skies

This option can be especially good at fending off wear, dents, scratches, discoloration from sunlight, and stains. Easy installation is another plus, especially for tiles or planks, as are more color and design choices than before. Premium vinyl does a better job of imitating stone, tile, and even oak, but even the best products still look like vinyl. And the best can cost at least as much as the best solid wood and laminate floors. 

Linoleum

Photo: Armstrong Linoleum in Firebird Red

Made of linseed oil and wood products, linoleum is a natural, resilient material. Today's products offer far more styles and colors. Linoleum tends to fend off discoloration from sunlight, but resistance to wear, scratches, dents and moisture has varied widely in our tests from product to product. Linoleum can also be relatively expensive. 

Ceramic Tile

Photo: Shaw Ceramic Tile In Cappuccino

This classic material tends to resist wear, moisture, scratches, dents, and stains. But tiles can crack and grout can stain, and dropped cups and dishes break more easily on its hard surface. It's also relatively expensive and hard to install. While some can now be floated without the usual cement and grout, that makes replacing cracked tiles a challenge. 

Flooring Features

Different flooring materials require different installation techniques. Homeowners install about half of all flooring. Floated floors that go down without glue or fasteners are easiest. In the case of vinyl, planks or tiles; they are easier to install than sheets. 

• Nail- or Staple-Down Installation: These are the methods of choice with solid wood and engineered wood over a wood subfloor. Standard, ¾-inch-thick solid-wood strip and plank flooring is traditionally nailed to the subfloor; thinner solid or engineered material is almost always stapled. The fasteners are usually driven diagonally through the tongue side of the material and into the subfloor (blind-nailed) so they are invisible once the floor is finished. Solid flooring can also be nailed straight through the surface (face-nailed) with decorative cut nails or fastened with screws, which are typically countersunk and concealed with wood plugs. Installers often sandwich a layer of 15-pound felt or rosin paper between the subfloor and floor to prevent moisture between the two and to deaden sound.

• Floating Installation: This works with engineered wood, plastic laminate, linoleum and some ceramic tile over a wood or concrete subfloor or existing flooring. Tongue-and-groove planks or tiles lock together mechanically. Some products must also be glued together at the joints. The material generally goes over a thin foam or cork pad, which fills minor flaws in the subfloor and absorbs sound. Installations over concrete require a thin plastic vapor barrier.

• Glue-Down Installation: Engineered wood, vinyl, linoleum, and tiles are typically glued. You trowel adhesive onto a clean, flat, wood or concrete subfloor or existing flooring and lay down the sheets, planks, or tiles. No vapor barrier is required. Some glue-down flooring is simply peel-and-stick, the easiest to install. You'll also find vinyl flooring in sheets and easier-to-install tiles. 

Flooring Brands

The national flooring brands listed below are sold by home centers and specialty flooring retailers. Use these profiles to compare flooring by brand. 

Armstrong manufactures flooring under the well-recognized brand names Armstrong and Bruce, and the speciality brand Robbins. Armstrong is also the brand leader in vinyl sheet and vinyl-tile flooring, dominating the category with more than 40 percent of sales. The Armstrong brand also includes wood and laminate, a line of linoleum flooring, and has recently added ceramic tile. 

---

Mannington is a one-stop floor manufacture with products in every flooring category. They are among the top three leading vinyl flooring brands and have a foothold in wood, laminate, and porcelain tile. A recent innovation is the Adura Luxury line of premium vinyl tile and planks that mimic the look of hardwood and ceramic tile. Mannington is available only through speciality flooring stores. 

---

This leading carpet manufacturer crossed over to hard-surface flooring through acquisitions and partnerships and now offers wood, laminate, and vinyl flooring.

Mohawk sells stone flooring under the American Olean brand and laminate under the Quick-Step brand. Their Dal-Tile brand accounts for half of the ceramic tile category sales.

In vinyl, Mohawk distributes the Congoleum brand through its vast dealer network. Mohawk flooring is sold through mass home centers and specialty floor stores and is one of the few flooring manufacturers that takes part directly at retail by licensing its trade names - Mohawk Floorz and Mohawk FloorScapes - to locally owned flooring specialty dealers. 

---

This leading carpet manufacturer now offers wood, laminate, and ceramic-tile flooring; it recently expanded its presence in wood through the acquisition of Anderson Flooring. Shaw is available through home-center chains and specialty flooring stores and has its own retail programs - Shaw Design Center and Shaw Flooring Alliance that offer local dealers expanded product lines, display assistance, and training.

---

Tarkett

Originally a European manufacturer of linoleum, Tarkett is now among the largest flooring manufacturers worldwide. Tarkett offers wood, laminate, and vinyl flooring under its own brand, and luxury vinyl tile from Nafco. Tarket also makes FiberFloor, a water-resistant flooring that combines the qualities of carpet and vinyl. Tarkett is available through mass home centers and specialty flooring retailers. 

Photo: American Cabinet & Flooring Showroom

Copyright © 2006-2012 Consumers Union of U.S., Inc.

1992-2012, 20 Years Then & Now: Flooring Innovations & Evolutions

Innovative technologies have revolutionized the business world over the last 20 years. Smartphones, social media, search engines, information storage and digital photography have created an entirely different business and communications environment since 1992. Personal assistants - the real, human kind who used to answer phones and schedule meetings - have been replaced by scheduling software and the instant accessibility of mobile phones, email, social media, instant messaging and texting. Almost anyone can be reached anywhere at any time. 

While the floor covering industry has taken advantage of those technologies, just like every other industry there's also been rapid innovation in manufacturing over the last 20 years, often the result of changing tastes, economic realities, or simply the need to create a better product. For example, hardwood with knots and nail holes was considered a defective product in 1992. Today, character wood is one of the most significant style trends in hardwood flooring. Click systems weren't yet invented in 1992, but in 2012 they account for significant portions of the laminate, hardwood and LVT markets. And Saxony carpet, with its footprints and vacuum tracks, has been replaced with textured carpet, which offers greater durability.

Here's our list of the most significant innovations in the flooring industry, as well as a number of developments pre-1992 that became widely accepted the last two decades.

1992 TO PRESENT: INNOVATIONS, PRODUCT DEVELOPMENTS, EVOLUTIONS  & ADAPTATIONS

Soft Surface Flooring

Saxony to Texture
When: Early to mid 90's

Texture innovations advanced soft surfaces beyond Saxony (cut pile). Saxony was soft but it showed every footprint and vacuum track. Newer textures that incorporate fiber with added twist and crimp were introduced into carpet styles called "trackless", which ultimately evolved into what we now call friezes. The technology used a Stuffer Box developed by Superba. The transition also resulted in greater variety for the consumer.

Staple to Filament
When: Early to mid 2000s

Continuous filament fiber has taken significant marketshare from staple due to its lower cost and improved uniformity. The labor costs to produce staple fiber are twice as high as bulked continuous filament. While BCF technology has been evolving since the mids 80x, it was the ever increasing costs of polymer along with the continued advancements in extrusion technology that drove the carpet producers to make the investment to convert their fiber processes over to BCF. The fact that it doesn't shed like staple fiber offers a significant benefit for the consumer.

BCF Polyester
When: 2007 to present

Multiple factors have led to the rapid growth of BCF polyester. Pricing for nylon chip has continued to rise as nylon car parts have increased in popularity as a lightweight alternative to heavier metal parts. While nylon is still heralded by many as the best performing synthetic carpet fiber, carpets made with nylon can no longer meet the price points where much of the volume is generated at retail. Polyester, on the other hand is a much cheaper polymer and the global capacity to produce polyester chip is abundant due to its wide use in apparel markets. In addition, extrusion technology has advanced (with the development of the Neumag S5 extruders) along with the heatsetting equipment that gives the fiber bulk and twist. So the polyester BCF fiber used in carpet today is much more advanced than the fiber of the 80s and 90s.

Composite Secondary (SoftBac)
When: 1997

The first evolution in carpet backing came when the industry shifted from jute to synthetic fibers in the 70s. But in the last 15 years, producers have discovered that more substantial materials could be attached to carpet in the coating process to enhance the carpet's performance and bring added value to the end user. The most widely used example is SoftBac, which Shaw Industries developed with Synthetic Industries (which Shaw later acquired). SoftBac offers a host of performance advantages. It's more dimensionally stable than standard carpet backing so it reduces the need for installed carpet to be restretched, and it reduces potential damage to walls and baseboards during installation.

EcoWorx
When: 1999 

When carpet tile was first developed for the commercial market, vinyl was most commonly used on the back for dimensional stability. But as Shaw sought to find a PVC-free alternative that could be recycled into carpet backing more than once (cradle to cradle), the company developed EcoWorx - an olefin based material that it now uses on the majority of its tile products. 

Triexta
When: 2005 

DuPont created a new class of fiber with its triexta, a PTT polymer that has superior resilience and stain resistance to polyester. About 37% of the fiber's composition comes from corn. The fiber is marketed by DuPont under the Sorona name and is sold exclusively to Mohawk for residential carpet, called SmartStrand by Mohawk. The fiber is also available in the commercial sector from several different carpet producers but has not yet achieved wide acceptance.

Soft Fibers
When: 1998 to present 

Anso's Caress and Stainmaster's Tactesse were the first soft fiber products with approximately ten deniers per filament in 1998. Today, Invista's TruSoft is four to five deniers per filament, the thinnest nylon carpet fiber on the market. Earlier this year, Mohawk introduced SmartStrand Silk, which is a fine denier fiber made out of triexta. 

Computerized Servo Tufting
When: Mid 90s 

Servos originally were incorporated into the tufting process to enhance product and setup reliability, and they also made setups easier and quicker. However, servos soon began to be used to create patterned carpet by allowing for better control of yarn in the tufting process. Today, servo control allows for better carpet styling and constructions, and makes operating a tufting machine more efficient.

Precision Cut/Uncut
When: Early 90s

Precision cut/uncut creates sophisticated styles similar to the look of carpet produced on a Wilton Velvet loom. It can combine rows of cut pile and uncut loops within a tuft row in varying amounts, which makes it possible to produce a wide range of textures, geometrics, solids, or multi-colored patterns in any combination. It can also create tip-sheared effects without the shearing process. Cut pile and loop pile can be combined in the same tuft row and at essentially the same pile height without burying yarns. 

The Growth of Carpet Tile
When: First major U.S. installation - 1972

U.S. consumption of carpet tile has doubled in the last ten years, reaching over 80 million square yards of annual consumption. Today, carpet tile has a 36% marketshare in dollars compared to broadloom in the U.S. commercial market. The key benefits of carpet tile include compatibility with open office systems, design flexibility, reduced installation time, ease of shipping, reduced waste, low carbon footprint, and improved lifecycle performance.

Continued Backward Integration
When: From 1978 to 2006

Backward integration into backing started with Carl Bouckaert when Beaulieu ventured into this area in the 80s. But it wasn't until the mid 2000's that the two larger carpet mills made a move with major investments. Within a year, starting in 2005, Shaw bought Synthetic Industry's plant in Chickamauga, GA and Mohawk bought Wayn-Tex in Waynesboro, VA and a Propex plant in Roanoke, AL.

Beaulieu also led the way in making its own carpet yarn, dating back to the late 70s. Shaw and Mohawk picked up some extrusion capability along the way with several of the acquisitions they made in the late 80s and through the 90s. Mohawk's fiber integration got a big boost with the acquistion of Image in 1999 and it's been incrementally adding its own extrusion equipment ever since. But it wasn't until 2005 that Shaw picked up much of its nylon 6 capacity with the acquisition of Honeywell's nylon plants. Today, independent yarn suppliers like DuPont and Invista keep themselves viable through innovation (creating new fibers like triexta and TruSoft). Universal Fibers and Aquafil also remain nimble suppliers of specialty performance fibers.

Environmental Achievements

Evergreen Recycling
When: 1999 to present

The Evergreen nylon recycling plant in Augusta, GA was built in 1999 as a joint venture between AlliedSignal and DSM. The plant was shut down in September 2001 because at that time virgin caprolactam, a key ingredient in nylon 6 polymer, was cheaper than caprolactam produced from recycled carpet. Shaw purchased 50% of the plant as part of its Honeywell acquisition in 2005 and bought the rest a year later. In February 2007, Shaw re-started the plant and it now has the annual capacity to convert 100 million pounds of post-consumer carpet into 30 million pounds of caprolactam. Evergreen's ability to convert used nylon 6 back into the key components of carpet is exactly what architect Bill McDonough was referring to when he coined the term cradle to cradle. 

Last year, Aquafil opened a similar plant in Slovenia for the same purpose, offering 100% recycled content fiber.

Plastic Bottle Recycling into PET Fiber
When: 1999 to present

Mohawk released its Everstrand, a 100% post-consumer recycled content PET staple fiber, to the market in 1999. And in 2010 Shaw opened its Clear Path Recycling plant in partnership with DAK Americas to convert recycled plastic bottles into carpet fiber for Shaw's ClearTouch carpet products. Today, PET BCF fiber has grown to account for about 25% of the market. 

Hard Surface Flooring

The Rise of Engineered Hardwood
When: last 20 years

Although first produced over 50 years ago, engineered hardwood has been taking share from solid hardwood at a more rapid pace in the last 20 years. Last year for the first time engineered hardwood surpassed solid, taking a 51% share in dollar value. Engineered hardwood is composed of multiple real wood veneers bonded in a crossply construction. The resulting product has more dimensional stability than solid wood and is less susceptible to shrinking and bowing. In addition, manufacturing engineered wood produces less waste than the production of solid hardwood, creating greater yield from harvested wood. 

Character Wood
When: 2001

Character woods - handscraped, weathered, distressed, chattered, rustic and other looks - enhance the inherent grade and color variation found in real wood. Previously these "defects" were either cut out or relegated to the inner piles of wood floors, where they would not be seen. However, many of today's consumers appreciate the fact that wear and tear is more easily disguised in character wood floors than in traditional glossy hardwood, which makes them friendly for commercial environments or for residences with kids and pets.

The Growth of Pre-finished Wood
When: 1997 to present

An estimated 85% of all hardwood flooring is now finished in the factory rather than on site. The wear surface of a prefinished wood floor is usually harder due to the aluminum oxide coating that can only be applied at the factory. This technology was first introduced on hardwood floors by Anderson in 1997. Another more recent driver of the growth of pre-finished flooring is that home construction is way below normal levels, and most site finished flooring is installed in new homes. The growing preference for engineered hardwood has also accelerated this trend, since most engineered wood is pre-finished. Seventy percent of solid hardwood is now pre-finished as well.

UV Cured Urethane Finish
When: 1986

Today's polyurethane finishes are rapidly cured in the factory under ultra violet light, replacing the need for slow drying solvent based finishes. This speeds up the production process significantly - one coat takes minutes rather than hours - and enables manufacturers to apply more layers of finish in less time, resulting in a more durable finished product. Mannington was the first company to convert to this innovative finishing system. 

Strand Woven Bamboo
When: 2003

Strand-woven bamboo was developed to overcome the softness of traditional bamboo flooring. It's made by shredding the bamboo fibers into strips, which are coated with phenolic resin and pressed into a mold with high pressure. The resulting wood has twice the hardness of domestic oak. 

Mechanical Locking Systems (Click Systems)
When: 1994

The first mechanical locking system that didn't require spring clips was developed by Välinge in 1994. Alloc, in 1996, was the first company to incorporate the system into a product. Today, glueless installation systems account for 90% of all the laminate flooring sold. Besides eliminating the need for adhesives, these systems also speed  up installation. Today, mechanical locking systems are also seen on engineered hardwood, LVT and some ceramic tile systems.

Embossed-In-Register Surface Texture
When: 2003

Faus was the first company in the U.S. to earn a patent for embossed-in-register laminate flooring. This method of matching the texture of the surface with the grain lines or veining of the visual, makes the product look more like real wood or stone. 

Aluminum Oxide Finish
When: 1994

Aluminum oxide is added to the melamine finish of laminate flooring to increase the product's durability. Products with aluminum oxide finish get improved Taber cycle (rate of wear) ratings. This process can only be done on product that is finished in a factory.

High Glass Laminate
When: 2010

High gloss or piano finish laminate flooring with an AC5 rating, the top durability rating, was introduced to the marker just last year.

Resilient

Bio-Based Tile
When: 2009

Armstrong's bio-based composition tile is created using Bio-Stride polymer, which is made from corn. The finished product contains approximately 3% bio-based content. Over one billion square feet of bio-based tile is installed annually.

Fiberglass-Backed/Floating Sheet
When: 2002

First manufactured in North America by Tarkett, fiberglass backing adds stability to resilient flooring, making it flexible and more capable of overcoming irregularities in the subfloor. In addition, fiberglass-backed resilient flooring is more durable than felt-backed vinyl.

Luxury Vinyl Tile (LVT)
When: 1988 to present

Now one of the fastest growing categories in the flooring industry, LVT was first developed by Congoleum in 1988. LVT products on the market today provide some of the most realistic looking visuals achievable using synthetic materials. LVT is composed of a detailed print design bonded to a solid vinyl carrier. It has durable wearlayers and greater wear resistance than standard vinyl tile. LVT is used in both residential and commercial applications, and comes in both tile and plank formats. 

Groutable LVT Tile
When: 2009

First introduced to the market as Congoleum DuraCeramic, groutable LVT tile offers a look akin to ceramic tile without the weight or expense of installing real ceramic. For colder climates, it offers the look of ceramic, without being cool to the touch.

The Continuing Growth of Porcelain in the U.S.
When: 1986

Crossville built the first porcelain tile plant in the U.S. in 1986. Before then, all tile produced in the U.S. was ceramic. Ceramic tiles, made from clay that's fired in a kiln are more porous than porcelain and don't provide as much strength. Porcelain tile, made by pressing and heating finely ground ingredients, is more suitable for commercial applications due to its increased durability.

Digital Glazing
When: Early 2000s

Digital printing revolutionized the ceramic tile industry, enabling realistic stone, leather, fabric, marble, and wood visuals, as well as new hybrid and design-oriented looks. The digital printer sprays the glaze, much like a digital paper printer, rather than applying it via a system of rollers. Digital printing is often used in combination with surface texture methods.

What: Roller Hearth Kiln
When: 2001

A roller hearth kiln uses a conveyor belt to transport the tile through the kiln. This type of kiln has superior efficiency as well as a condensed firing cycle. The roller kilns in the early 80's could only produce 6 to 7 million square feet of product per year. Today's kilns can make 30 million square feet with fewer workers.