ConsumerReports.org Buying Guide: Kitchen Cabinets

Photo: American Cabinet & Flooring, Designer Amber Albrecht

Getting Started

Once upon a time, dovetail joints inside the drawers were practically all you needed to distinguish high-end cabinets. The distinction has blurred as more manufacturers offer premium features even on low-end lines. Indeed, we found you can have these and other once-exclusive features and still wind up with shoddy construction.

A little research beforehand can save you time at the store and the thousands you can lose on less-than-stellar cabinets. Start by checking online manufacturer and retail sites and catalogs and taking a good look at store displays; you'll be able to tell the quality cabinets from the polished pretenders once you know where to look. And trust your taste; readers who chose cabinets solely on the basis of advice from contractors, designers, or architects were twice as likely to report a problem as those more involved in the selection, according to a survey by the Consumer Reports National Research Center. 

Put Your Money Where it Counts

If you're on a tight budget, skip the non essentials and focus on convenience. Work-savers include a lazy Susan, a pull-down soap and sponge holder, and deep drawers for pots. Glazing, while nice, typically adds 10 to 20 percent to the cost. Remember to factor labor into your budget, since installation can easily account for more than half of the cabinet's cost. 

Consider Renewing Your Old Cabinets

Replacing cabinets is typically the priciest part of a kitchen remodel. Readers who hired contractors paid on average more than $9,000 for new cabinets, and about a quarter of the readers paid more than $15,000, according to our survey. A couple of long weekends' work can change your kitchen's look for a tenth that cost. If your old cabinets are plumb, square, and sturdy, consider refinishing them with some simple sanding, painting or staining, and drilling. You can even dress them up with custom-built doors, possibly with glass panes, and still save a bundle over all-new cabinets. Even having a cabinetmaker reface old cabinets with veneer costs less than replacing them. 

You can also make old cabinets work better than new by adding pull-out shelves, lazy Susans, and other inexpensive upgrades. The final touch: install several under-cabinet halogen, xenon, or fluorescent task lights wherever you or a family member will be dicing, doing homework, or reading a recipe. 

Types of Cabinets

Cabinets can vary greatly in price. Here's an overview of the three types of cabinets in broad price segments that you'll find at stores. 

Basic

Often called stock, these are inexpensive, off-the-shelf cabinets, ready to assemble and install. Many use frameless construction where the door has no lip or "reveal" around it.

Photo: Consumer Reports

PROS: These are a money-saving choice if you aren't too picky about the style options or don't demand a perfect fit. More have better drawers, sold-wood doors, and other once-pricey features. And we've found basic models that perform better in our wear tests than some more-expensive models. 

CONS: Many basic boxes are thinly veneered particle board, rather than higher-quality plywood. Style and trim options, sizes, and accessories, are still limited. And figure on an hour or more of assembly time for each set of base and wall cabinets. 

Midlevel

These semi-custom models are a sound choice for most kitchens. Many use face-framePhoto: Consumer Reports construction, where the solid-wood frame shows around the door and drawers.

PROS: Midlevel models offer many made-to-order custom options, including size, materials, finish, elaborate crown moldings and other trim, and accessories such as range-hood covers. That can make them the best-value option overall.

CONS: As with basic cabinets, features and quality can vary considerably. Boxes may be veneered particleboard rather than high-quality plywood. 

Premium

Short of custom made-to-order cabinets, these semi-custom models offer the most style and storage options.

Photo: Consumer Reports

PROS: They generally come with plywood boxes and other premium materials and hardware. Widths may come in ¼-inch increments, rather than the typical 3-inches.

CONS: While generally less expensive than fully made-to-order custom units, models with the most features and highest quality can cost as much as some full-custom units. 

Features

What separates a well-made cabinet from a cheap imitation? Here are the cabinet features to look for-and what to avoid. 

Cabinet Box: Best is ½-to ¾-inch furniture-grade plywood. Medium-density fiberboard (MDF) is OK, but avoid ⅜-inch coated particleboard.

Doors: Most manufacturers offer a similar range of door-style options for all their price levels. Look for a solid-wood frame surrounding solid-wood or plywood panels. Veneered particleboard or an MDF panel is OK, but avoid laminate or thermofoil over particleboard.

Drawers: Well-built drawers are critical, because they get the most use. The best ones have solid-wood sides, dovetail joinery, and a plywood bottom that fits grooves on four sides. Avoid stapled particleboard.

Hardware: Full-extension drawer guides are better than integrated side rails or under mounted double-roller designs. Some premium models have a "soft close" feature that stops drawers from slamming shut. Many cabinet models allow you to upgrade the drawer guides. As for door hinges, we didn't find any significant differences among the different types. 

Shelves: Look for ¾-inch plywood of MDF. Lesser quality ⅝- or ½-inch particleboard shelves may sag.

Mounting Strips: Ask the contractor to use ¾-inch hardwood strips or metal strips with bolt holes. Thinner wood, MDF, or particlebard can be a concern with heavily loaded wall cabinets. 

Copyright © 2006-2012 Consumers Union of U.S., Inc.

Get the Luxury Look for Less

Best and Worst Kitchen Appliances, Countertops, Flooring and More

(Photo: Thinkstock)

Got a bottomless budget for your dream kitchen? You could pay for the sleekest pro-style appliances the most luxurious stone countertop, and the trendiest hardwood flooring and still end up paying again to fix things that break down, crack, or dent. Or you could use our advice to make every dollar count by sidestepping high-priced pitfalls in the first place. 

And if your budget is more in the $15,000-to-$30,000 range that most homeowners spend on renovations, relax: You can have a beautiful kitchen that's functional and efficient, and only looks expensive, like the example here. It combines semi-custom cabinets, quartz countertops, and vinyl flooring to achieve an urban sophistication befitting its city setting.

Appliances

KitchenAid KDRU763V $6,000 (Photo: Consumer Reports)High End: A pro-style, 36-inch range with high-Btu burners; a built-in refrigerator with panels that match the surrounding cabinetry; and whisper-quiet dishwashers are expected in today's luxury homes. "If buyers walk into a high-end home and see apartment-grade or even midrange appliances, they're going to wonder what else is missing from their wish list," says Jim Hamilton, regional Vice President of the National Association of Realtors.

Separate steam ovens, which can cost several thousand dollars and are pitched as a healthful way to prepare vegetables, fish, and even desserts, are a popular trend in high-end appliances. "Restaurants have been steaming food for years. Now the technology is finally coming to the residential market," says Laurie Haefele, a designer-architect in Santa Monica, CA. Some models combine steam and convection cooking to lock in moisture while browning foods that require it.

But not all high-end appliances deliver. Though we recommend KitchenAid dual-fuel ranges, its electric and gas models have been repair-prone, as have Jenn-Air's electric ranges, wall ovens, and cooktops. And some of Viking's Professional-series built-in refrigerators are at the bottom of our ratings.

Samsung FTQ307NWGX $1,700 (Photo: Consumer Reports)

For Less: Many mainstream brands have upped their styling with "faux pro" features, including beefy controls and a stainless-steel finish. And they equal or surpass their pricey counterparts when it comes to cooking and reliability. GE's $1,500 Profile PGB910SEM has sleek styling, and it's our top-performing gas range. Or consider an induction range or cooktop,which uses electromagnetism to deliver pinpoint heating and control. Among refrigerators, cabinet-depth models offer the streamlined look of built-ins for thousands less. 

---

Flooring

High End: Wood has warmth and elegance and can be used in adjacent rooms, creating a seamless flow between spaces. "Plus if you drop a teacup on a wood floor, the cup has a fighting chance," says Kelly Stewart, a National Kitchen & Bath Association-certified kitchen designer in Stamford, CT.

Mullican St. Andrews Solid Oak Strip 10930, $6.30 per sqft (Photo: Consumer Reports)Antique wood floors, milled from timbers reclaimed from centuries-old buildings, have character, but they've been particularly prone to wear and tear in our tests. Performance-wise, you're better off with solid wood flooring with a factory finish, which costs more up front than unfinished flooring but lasts longer and eliminates the mess of on-site finishing. 

Even the most durable wood floors are no match for heavy traffic, especially if it includes sandy shoes and dog's claws. Durable stones such as granite and quartzite offer more protection and a sense of permanence. "People subconsciously associate stone with stability underfoot, so its a natural choice for flooring," says New York City architect Leonard Kady. 

Quick-Step Perspectives Ansel Oak UF1259, $4 per sq ft (Photo: Consumer Reports)For Less: Engineered wood flooring, which has a veneer or real wood over substrate, can be floated over the subfloor, saving on installation costs. The downside is that most can be refinished only once, whereas solid flooring can be refinished multiple times.

Tile is an all-natural option that realistically mimics costly materials. "Antique limestone floors from a mansion in France are marvelous, but you can use ceramic tile to achieve a similar look for a fraction of the cost, and they're a lot easier to maintain," Kady says. Vinyl flooring is another less expensive option with some very convincing faux patterns, including wood and natural stone. 

---

Countertops

White Carrera Marble, $150 per sq ft (Photo: Consumer Reports)High End: Authenticity is the catchphrase in countertops. That means natural stone for top-tier designers, though many are moving away from speckled granites such as Uba Tuba in favor of wavy marble, especially in popular white kitchens. But given its susceptibility to staining and scratching, marble is not for everyone, cautions Jonas Carnemark, a design-builder in Washington, D.C. who is certified by the National Association of the Remodeling Industry.

"Designers talk about patina, but you have to remember that's just a fancy term for scratches and stains," he says. If, like many homeowners, you want things to stay looking new, consider quartz, a highly durable engineered stone that can resemble natural stone. All white-quartz countertops are also popular thanks to improvements in technology that give them the purest tone. 

Formica IdealEdge Laminate, $16 per sq ft (Photo: Consumer Reports)For Less: For example, shop around for affordable stone slabs. If you can fall in love with a Danby marble from Vermont instead of one of the more expensive Italian imports, you're going to save at least 20%. There are even bigger savings out there with granite, especially if you choose from remnants at the stone yard. Some granite has wavy marble-like veining.

Laminate, the most affordable countertop option by far, has come a long way. The latest printing technologies result in faux patterns that look like real stone, or you can choose a solid white that's suited to contemporary kitchens. Formica has even eliminated the unsightly black line along the edge of the countertop that used to be laminate's telltale sign. 

---

Cabinets

Fieldstone Custom Cabinet, $475 (Photo: Consumer Reports)High End: In the most expensive kitchens, cabinets are custom-built to the precise dimensions of the room. The result is a fully integrated look that's in keeping with the current taste for clean, minimalist design. 

The good news is that this style is inherently less expensive - and easier to clean - than the once-fashionable country kitchen, which called for cabinetry with elaborate moldings and applied detail. The bad news is that custom cabinets of any description cost tens of thousands of dollars. "It's half the cost of the kitchen," says designer-architect Laurie Haefele, recalling projects for which the cabinet bill alone ran to six figures. 

For Less: If the layout of the existing cabinets works and the units are plumb, square, and sturdy, you could refinish them with a fresh coat of paint or reface them by replacing the cabinet doors and drawers and applying veneers to the face frames and ends. Retrofitting the cabinets with pull-out drawers, lazy Susans, and retractable trash cans can improve their function.

If your cabinets are too far gone, you can save 30% or more by choosing semi-custom units. Stock units save even more, without necessarily sacrificing style. Ikea Stock Cabinet, $330 (Photo: Consumer Reports)

"There are a plethora of showrooms where you can get the full kitchen from Italy or Germany, but we've been able to integrate Ikea cabinets for budget-minded clients that offer a similar look,"says Chicago architect Pam Lamaster-Millet. "The trick is finding a skilled installer who knows the tricks for making the units look built-in." That might include applying a toe kick to base cabinets or a valance to upper cabinets to conceal the undercabinet lighting.

Whether semi-custom or stock, the features that held up best in our cabinet tests include solid-wood or plywood doors; boxes made of ½- to ¾ -inch plywood;solid-wood drawer sides with dovetail joints, full-extension glides, and a plywood bottom; and adjustable, ¾-inch plywood or medium-density fiberboard shelving.

---

Spending Traps to Avoid

• Poor Planning - changing the design after the project is under way is guaranteed to break the budget. Proper planning, including showroom visits and meeting with professionals, will take a couple of months. 

• Skimping on Labor - sooner or later the cracks will show with poor construction. Invest in quality, especially for cabinet installation and tile setting, where small mistakes can lead to big disappointment.

• Paying More for Pointless Features - smart appliances are supposed to save money by powering down when electricity rates are highest. But you'll only reap the rewards if your home has a "smart" meter and your utility company offers time-of-use rates. Otherwise, you'll be paying more for a technology that may be years away.

• Expecting a Fridge to Prevent Spoilage - Food preservation features are the latest thing for marketing. But the claims are hard to measure. What you can do is find a refrigerator that delivers top temperature performance in our tests.

• Falling for High-Priced Fixtures - stainless steel sinks top our ratings, even in less expensive thickness. Popular pullout sprays are available on entry-level faucets. As for lighting, the illumination that matters most comes from inexpensive - and hidden - undercabinet fixtures. 

(Photo: American Cabinet & Flooring Designer: Clay Bernard)

Copyright © 2006-2012 Consumers Union of U.S., Inc.